
Briquette Machine
Fabricated machinery for turning biomass into briquettes.
Biomass carbonization equipment for converting prepared sawdust into a carbon-rich solid. The process uses pyrolysis: biomass is heated in an oxygen-limited chamber so it decomposes into charcoal rather than simply burning to ash. Discuss your feedstock, moisture level, production goals and heating arrangement with FRATEC Engineering to confirm a suitable configuration.

Biomass carbonization equipment for converting prepared sawdust into a carbon-rich solid. The process uses pyrolysis: biomass is heated in an oxygen-limited chamber so it decomposes into charcoal rather than simply burning to ash. Discuss your feedstock, moisture level, production goals and heating arrangement with FRATEC Engineering to confirm a suitable configuration. Contact our team for a quote tailored to your requirements.
Sawdust carbonization and charcoal preparation for biomass-fuel production
Ideally reduce sawdust moisture to around 8–15% before loading. Wet sawdust produces more smoke and can result in lower-quality charcoal.
Load the dry sawdust into the chamber without packing it so tightly that gases cannot escape. Follow the loading limits and venting requirements supplied for your machine.
An external burner or controlled fire heats the chamber while oxygen entering the carbonization chamber is kept very low. Typical pyrolysis temperatures are roughly 350–500°C, depending on the machine and desired product; confirm the operating settings for your unit with our team.
As the sawdust carbonizes, it releases water vapour, smoke and combustible gases. In systems designed for gas recovery, these gases can be directed back to the burner as fuel once the process is established. Continuous systems can feed biomass and discharge charcoal while recovering gases for heating; continuous operation and gas recovery must be confirmed for the supplied configuration.
These ranges are general process guidance, not confirmed performance specifications for the pictured machine. Operate only with trained supervision, suitable ventilation and the supplied operating instructions: hot surfaces and combustible gases present fire and carbon-monoxide risks. Follow the prescribed cooling procedure before opening the chamber or handling charcoal.
| Capacity | Confirm with our team |
| Power requirement | Confirm with our team |
| Material | Confirm with our team |
| Dimensions | Confirm with our team |
Installation, commissioning and operator guidance can be discussed as part of your quote.

Fabricated machinery for turning biomass into briquettes.

A manually operated press for forming prepared briquette material. Tell us what feedstock and binder you plan to use, the briquette shape required and the scale of production so we can discuss whether this setup suits your work.

Larger-scale briquette production equipment built to your needs.